Dissolvable Frac Plug Over Composite Frac Plugs- Why is it Regarded as Efficient Stimulation Tech?

There are thousands of wells that need 10,000-psi-rated frac plugs, which can be installed within the wellbore to ensure the cluster perforating operations, they are carried out before the hydraulic fracturing. On today’s date, the operators have got the choice to select from the myriad composite plugs, at lower cost, that gets milled after a fracture or choose amidst different other types of the high costing plugs that are composed of materials that are designed to get dissolved (dissolvable frac plug), at the downhole temperature in different completion fluids. However, it can get pretty confusing at times. This is why this article has been prepared to ensure that you make the right pick for the well completion services. Give a read ahead to understand better.

 

Interventionless Plug and Perf- The Dilemma of Choosing Dissolvable Frac Plug

The interventionless frac plugs, they get transformed to plug-and-perf efficiency. They are enabled to record the setting treatment depths through the elimination of post-frac drill-outs. However, when the interventionless downhole tools, they leave the obstructions within the wellbore or the restricted access, it can act as a huge complication for the operation of well completion services, both now as well as later.

 

Ideal Solution

The frac plug, that can completely disappear when downhole after the fracturing. The standard frac plugs, on the other hand, use the cast-iron slips and the rings or the ceramic buttons, that are coupled with the packer, for creating the tight engineered seal and to hold the plugs very firmly in their place.

However, some of such materials of high strength, they remain non-dissolvable. While the materials which can get disintegrated easily within the wellbore fluids, they are usually quite low in the mechanical strength and might be get disintegrated quite fast.

 

Enhancing Cost-effectiveness and Efficiency of Plug-and-Perf & Openhole Multistage Stimulation

The plug-and-perf systems that are dissolvable, they use the degradable plugs and not the composite plugs for isolating the zones during the stimulation. Further, this versatile system remains suitable for the uncemented, horizontal, vertical, or deviated applications in shale, cemented, dolomite, sandstone, and the other lithologies.

 

Fullbore Production ID Access

Material starts to degrade completely and then predictably within a few hours or the days. This ensures that the production is able to reach the full potential.

With the Fullbore access, there also increases the available options for the post-fracturing evaluation and the future production optimization as well as intervention.

 

Eliminating Mechanical Intervention

No plugs would mean, no mechanical intervention required for milling the same out. To run the dissolvable plugs, it eliminates the need for tubing or the coil tubing, which is conveyed perforating gun used for the fracture to stimulate 1st stage of the plug-and-perf operation.

The results received are that there is reduced expense of money and time. Further, the operations are even possible in the remote locations where there isn’t any access to the mechanical intervention units.

 
Increasing the Contact of Reservoir

Lateral length gets designed by costs, coil tubing length, and capabilities needed for effective well completion services. To eliminate post-fracturing CT intervention, it removes the limit on the length of lateral and maximizes reservoir contact while assuring estimated ultimate recovery.

 

Removing Mechanical Intervention Associated Risks

To manage to remove the milling debris, the risks of getting stuck, and the increasing costs, associated with the depleted reservoirs, it is very difficult. The mechanically engineered intervention equipment, when rigged up and down, it carries the risk too.

 

Reaching Quick to the Market

Eliminating the milling considerably, it reduces the time that is required between production and drilling. On the multi-well pads, by the time the drilling on the pad gets completed, 1st wells remain ready for flow back and then get placed on the production, hence providing quite a faster access to the revenue.

 

Challenge

Integrity, engineering seals, and mechanical strength- and the total disintegration, combining the seemingly non-compatible properties within the single tool, it can be accomplished using the advanced materials, high-performance design, unconventional engineering, and the unrelenting commitment towards delivering the needs of operators.

 

Why Dissolvable over Composite Frac Plugs?

As per the research conducted with the 10 of the United States Operators and the consultants having expertise in plug-and-perf completions, they revealed that the composite fracture plugs, they have proven to have a track record of the continuous improvement within pump-down speeds, water usage and drill-out time too.

However, with the dissolvable frac plug bringing in the new tech and new updates, it seemed to have been living up to the initial promise of reducing the cost of completion operations and alike. Either way, it is being adopted at large and is one of the modern world techs receiving the hype it must, unlike the composite fracture plugs, which are still accepted but are outdated for sure.

 

Get Your Next Dissolvable Frac Plug with Vertechs

So, if you are looking forward to purchasing your next dissolvable frac plug, now is the time to connect with Vertechs, the internationally innovation-powered service company which, with the passion and expertise of the employees, is continuously offering the best out there. Do not wait for more, and connect today to receive a proper guide and make a hassle-free purchase.

View Source:- Dissolvable Frac Plug Over Composite Frac Plugs- Why is it Regarded as Efficient Stimulation Tech?

Read Our One More Blog: Energy Consumption Monitoring for Energy Management